Table of Contents
Advertisement
Roller ASY
Replacement
4-16
Window
Lamp unit
Replace the roller ASY as follows:
WARNING
Wait at least 3 minutes after turning off the power before
replacement.
Upper transport unit
Operator panel
Power switch
Lever
7 To re-install lamp/heater,
reverse procedures in item
4 above.
Note:
Make sure to rotate lamp in
the direction as shown in the
Socket
left figure.
8 Align the lamp unit with
the grooves on the machine
and insert the lamp unit
completely. Then, turn the
thumb screw completely to
avoid cover open error.
9 Attach the side cover.
Thumb screw
1 Turn off the power switch.
2 Open the upper transport
unit. (See page 4-2)
M3099GX/GH OEM Manual
Advertisement
Table of Contents
