Table of Contents
Advertisement
4-14
Replacing the back-side lamp
Side cover
Thumb screw
Lamp unit
Lamp
Wire of the heater
Heater
Lamp unit
1 Turn off the power switch.
2 Slide and open the side
cover (small cover on the
center of the right cover).
Power
switch
3 Turn the thumb screw to
unlock the lamp unit and
pull the unit out of the
machine.
4 Rotate the lamp so that the
two terminals on each end
align with the exit slot on
the lamp socket.
Maintain the alignment and
remove the lamp from the
lamp sockets.
CAUTION
Be careful not to pull the wire
of the heater hard.
M3099GX/GH OEM Manual
Advertisement
Table of Contents
