Table of Contents
Advertisement
1 antenna cables (2) 2 screw
3 Mini-Card
8. Lift the Mini-Card out of the system board connector.
Replacing the Mini-Card(s)
1. Follow the instructions in
2. Remove the new Mini-Card from its packaging.
CAUTION:
CAUTION:
board, and realign the card.
CAUTION:
3. Insert the Mini-Card connector at a 45-degree angle into the appropriate system board connector. For example, the WLAN card connector is labeled
WLAN.
4. Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system board.
5. Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-
Cards supported by your computer.
Connectors on the Mini-Card
WWAN (2 antenna cables)
Main WWAN (white triangle)
Auxiliary WWAN (black triangle)
WLAN (2 antenna cables)
Main WLAN (white triangle)
Auxiliary WLAN (black triangle)
TV tuner (1 antenna cable)
6. Secure the unused antenna cables in the protective mylar sleeve.
7. Replace the palm rest (see
8. Follow the instructions from
9. Replace the keyboard (see
10. Replace the battery (see
11. Install the drivers and utilities for your computer, as required.
Great user manuals database on
Before You
Begin.
Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system
To avoid damage to the Mini-Card, never place cables under the card.
Antenna Cable Color Scheme
white with gray stripe
black with gray stripe
white
black
black
Replacing the Palm
Rest).
step 5
to
step 7
in
Replacing the Hard
Replacing the
Keyboard).
Replacing the
Battery).
UserManuals.info
Drive.
Advertisement
Table of Contents
