Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 179

Processes to be Present
Figure 127:
Process to be Present Page (Detail)
Table 92:
Process to be Present Page (Detail)
Parameter Description
Process
Location
l
l
l
l
l
l
Enter the
Process
l
name
l
l
Enter the
Display
name
When you save your Process details, the key information appears in the Processes to be present page list.
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Choose from one of the pre-defined paths, or choose None.
SystemDrive - For example, C:
SystemRoot - For example, C:\Windows
ProgramFiles - For example, "C:\Program Files"
HOMEDRIVE - For example, C:
HOMEPATH - For example, \Users\JohnDoe
None - By selecting None, you can enter a custom path name in the Process Name field.
A pathname containing the process executable name. Some valid examples are listed below:
If SystemRoot is specified in the Process Location field, then entering notepad.exe in this field
specifies that the following full pathname for the process should be checked:
%SystemRoot%\notepad.exe. Typically, this expands to: C:\Windows\notepad.exe
If ProgramFiles is specified in the Process Location field, then entering "Mozilla
Firefox\firefox.exe" in this field specifies that the following full pathname for the process should
be checked: "%ProgramFiles%\Mozilla Firefox\firefox.exe". Typically, this expands to:
"C:\Program Files\Mozilla Firefox\firefox.exe"
If None is specified in the Process Location field, then entering "\temp\usurf.exe" in this field
specifies that the following full pathname for the process should be checked: "c:\temp\foo.exe"
Note that when the agent looks for running processes on the system, it looks for a process started
from the specified location. For example, if the process to be running is specified to be
C:\Windows\notepad.exe, the agent checks to see if there is a process running on the system that
was started from the location C:\Windows. Even if the agent finds another process with the same
name (notepad.exe) but started from a different location (C:\Temp), it will not match with what it is
looking for. In this case, it will still start the process C:\Windows\notepad.exe.
Enter a user friendly name for the process. This is displayed in end-user facing messages.
179