Advanced Services > Vpn Services > Ike > Ike Policy - Dell PowerConnect W-Airwave Configuration Manual

Table 89
Field
Folder
Name
Other Settings
IKE Aggressive Group
Name
Enable IKE RAP PSKL
Refresh/Caching
IKE Shared Secrets
Add
Select Add to create the VPN Services > IKE profile, or click Save to retain the changes to an existing IKE
profile. The profile appears on the Advanced Services > VPN Services > IKE page.
Advanced Services > VPN Services > IKE > IKE Policy
Navigate to Advanced Services > VPN Services > IKE > IKE Policy page from the Dell PowerConnect W
Configuration navigation pane to add a new IKE policy, as follows:
Table 90
Field
General Settings
Folder
Priority
Other Settings
Encryption
Dell PowerConnect W-AirWave 7.5 | Configuration Guide
Advanced Services > VPN Services > IKE Add/Edit Detail Fields and Descriptions (Continued)
Default
Top
Blank
No
Advanced Services > VPN Services > IKE > IKE Policy
Default
Top
Blank
Description
Set the folder with which the IKE profile is associated. The drop-down menu displays
all folders available for association with the IKE services profile.
Enter the name of the IKE profile.
Enter the authentication group name for aggressive mode. Make sure that the group
name matches the group name configured in the VPN client software. Aggressive
Mode condenses the IKE SA negotiations into three packets (versus six packets for
Main Mode). A group associates the same set of attributes to multiple clients.
Use this setting to enable refresh and caching for IKE on remote APs.
Select this button to add an IKE shared secret. The following settings appear.
Complete these settings and click Add in this section.
Subnet—Enter the subnet for the shared secret.

Subnet Mask—Enter the subnet mask for the shared secret.

IKE Shared Secret—Type the shared secret, and confirm.

Fields and Descriptions
Description
Set the folder with which the IKE policy profile is associated. The drop-down menu
displays all folders available for association with the IKE Policy profile.
Enter the priority number of this IKE policy.
From the drop-down menu, select the encryption type to be supported in the IKE
policy.
 DES
 3DES
 AES128
AES192

 AES256
Configuration Reference | 161