Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 47

Table 15:
Add Filter (Rules tab)
Container
Rule Evaluation
Algorithm
Add Rule
Move Up/Down
Edit/Remove Rule
Save
Cancel
When you click on Add Rule or Edit Rule, the Data Filter Rules Editor displays.
Figure 27:
Add Filter (Rules tab) - Rules Editor
Table 16:
Add Filter (Rules tab) - Rules Editor
Container Description
Matches ANY matches one of the configured conditions.
ALL indicates to match all of the configured conditions.
Type This indicates the namespace for the attribute.
l
l
l
l
Name Name of the attributes corresponding to the selected namespace (Type)
Operator A subset of string data type operators (EQUALS, NOT_EQUALS, LESS_THAN, LESS_THAN_OR_EQUALS,
GREATER_THAN, GREATER_THAN_OR_EQUALS, CONTAINS, NOT_CONTAINS, EXISTS, NOT_EXISTS)
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Description
Select first match is a logical OR operation of all the rules. Select all matches is a logical
AND operation of all the rules.
Add a rule to the filter
Change the ordering of rules.
Edit or remove a rule.
Save this filter
Cancel edit operation
Common - These are attributes common to RADIUS, TACACS, and WebAuth requests and
responses
RADIUS - Attributes associated with RADIUS authentication and accounting requests and
responses
TACACS - Attributes associated with TACACS authentication, accounting, and policy requests and
responses
Web Authentication Policy - Policy Manager policy objects assigned after evaluation of policies
associated with Web Authentication requests. Example: Auth Method, Auth Source, Enforcement
Profiles
47