Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 71

Navigation
Add the new Role Mapping Policy to the
Service:
Back in Roles (tab) >
l
Role Mapping Policy (selector): RMP_
l
DEPARTMENT >
Upon completion, click Next (to Posture)
l
5. Configure a Posture Server
NOTE: For purposes of posture evaluation, you can configure a Posture Policy (internal to Policy Manager), a Posture Server
(external), or an Audit Server (internal or external). Each of the first three use cases demonstrates one of these options; here, the
Posture Server
Policy Manager can be configured for a third-party posture server, to evaluate client health based on vendor-
specific credentials, typically credentials that cannot be evaluated internally by Policy Manager (that is, not in the
form of internal posture policies). Currently, Policy Manager supports the following posture server interface:
Microsoft NPS (RADIUS).
Refer to the following table to add the external posture server of type Microsoft NPS to the 802.1X service:
Table 26:
Posture Navigation and Settings
Navigation
Add a new Posture Server:
Posture (tab) >
l
Add new Posture Server (button) >
l
Configure Posture settings:
Posture Server (tab) >
l
Name (freeform): PS_NPS
l
Server Type (radio button): Microsoft NPS
l
Default Posture Token (selector): UNKOWN
l
Next (to Primary Server)
l
Configure connection settings:
Primary/ Backup Server (tabs): Enter
l
connection information for the RADIUS
posture server.
Next (button): from Primary Server to
l
Backup Server.
To complete your work in these tabs, click
l
the Save button.
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
Settings
Setting
71