Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 290

Figure 261:
Messaging Setup (SMTP Servers)
Table 170:
Messaging Setup (SMTP Servers tab)
Container
Select Server
Use the same settings for sending
both emails and SMSes
Server name
Username/password
Default from address
Use SSL
Port
Connection timeout
290
Description
Specify the server for which to configure messaging. All nodes in the cluster
appear in the drop down list.
Check this box to configure the same settings for both your SMTP and SMS
email servers. This box is checked, by default.
Fully qualified domain name or IP address of the server.
If your email server requires authentication for sending email messages,
enter the credentials here.
All emails sent out will have this from address in the message.
Use secure SSL connection for communications with the server.
This is TCP the port number that the SNMP server listens on.
Timeout for connection to the server (in seconds).
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide