Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 58

Container
Type
Chained
Simulations.
Test Date/Time
Next
Start Test
Save/Cancel
In the Attributes tab, enter the attributes of the policy component to be tested. The namespaces loaded in the Type
column depend on the type of simulation (See above).
NOTE: The Attributes tab will not display if you select the Audit Policy component in the Simulation tab.
58
Description
source. For an example of enabling attributes as a role, refer to
Directory " on page 129for more information.
Input (Simulation tab): Select Service, Authentication Source, User Name, and Date/Time.
l
Input (Attributes tab): Use the Rules Editor to create a request with the attributes you want
l
to test. All namespaces that are relevant in the Role Mapping Policy context are loaded in
the attributes editor.
Returns (Results tab): Role(s) , Post Status , Enforcement Profiles and Status Messages .
l
Use the calendar widget to specify date and time for simulation test.
Upon completion of your work in this tab, click Next to open the Attributes tab.
Run test. Outcome is displayed in the Results tab.
Click Save to commit or Cancel to dismiss the popup.
"Generic LDAP or Active
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide