Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 184

Interface Parameter
Antivirus
l
Page
l
(Detail 1)
Antivirus Product/Version/Last
Page Check
(Detail 2)
AntiSpyware
In the AntiSpyware page, an administrator can specify that an AntiSpyware application must be on and allows drill-
down to specify information about the AntiSpyware application. Click An Antipyware Application is On to
configure the AntiSpyware application information.
Figure 137:
AntiSpyware Page (Overview Before)
When enabled, the AntiSpyware detail page appears.
Figure 138:
AntiSpyware Page (Detail 1)
Click Add to specify product, and version check information.
184
Description
Add To configure Antivirus application attributes for testing against health
l
data, click Add.
Trashcan icon
To remove configured Antivirus application attributes from the list, click
l
the trashcan icon in that row.
Configure the specific settings for which to test against health data. All of
these checks may not be available for some products. Where checks are not
available, they are shown in disabled state on the UI.
Select the antivirus product - Select a vendor from the list
l
Product version check - No Check, Is Latest (requires registration with
l
ClearPass portal), At Least, In Last N Updates (requires registration with
ClearPass Portal)
Engine version check - Same choices as product version check.
l
Data file version check - Same choices as product version check
l
Data file has been updated in - Specify the interval in hours, days, weeks,
l
or months.
Last scan has been done before - Specify the interval in hours, days,
l
weeks, or months.
Real-time Protection Status Check - No Check, On, or Off.
l
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide