Adding And Modifying Roles - Dell Powerconnect W-ClearPass Hardware Appliances User Manual

NOTE: The Operator values that display for each Type and Name are based on the data type specified for the Authentication Source
(from the Configuration > Authentication > Sources page). If, for example, you modify the UserDN Data type on the Authentication
Sources page to be an Integer rather than a string, then the list of Operator values here will populate with values that are specific to
Integers.
When you save your Role Mapping configuration, it appears in the Mapping Rules tab list. In this interface, you can
select a rule (click and the background changes color), and then use the various widgets to Move Up, Move Down,
Edit the rule, or Remove the rule.

Adding and Modifying Roles

Policy Manager lists all available roles in the Roles page. From the menu, select Configuration > Identity > Roles.
Figure 100:
Roles
You can configure a role from within a Role Mapping Policy (Add New Role), or independently from the menu
(Configuration > Identity > Roles > Add Roles). In either case, roles exist independently of an individual Service
and can be accessed globally through the Role Mapping Policy of any Service.
When you click Add Roles from any of these locations, Policy Manager displays the Add New Role popup.
Figure 101:
Add New Role
158 Dell Networking W-ClearPass Policy Manager 6.0 | User Guide