Dell Powerconnect W-ClearPass Hardware Appliances User Manual page 234

Figure 204:
Device Tab
Table 128:
Device tab
Container
Name/
Description
IP Address or
Subnet
RADIUS/TACACS+
Shared Secret
Vendor
Enable RADIUS
CoA
RADIUS CoA Port
Attributes
Add/Cancel
234
Description
Specify identity of the device.
Specify the IP address or the subnet (E.g., 192.168.5.0/24) of the device.
Enter and confirm a Shared Secret for each of the two supported request protocols.
Optionally, specify the dictionary to be loaded for this device.
NOTE: RADIUS:IETF, the dictionary containing standard the set of RADIUS attributes, is always
loaded.
When you specify a vendor here, the RADIUS dictionary associated with this vendor is
automatically enabled.
Enable RADIUS Change of Authorization (RFC 3576/5176) for this device.
Set the UDP port on the device to send CoA actions. Default value is 3799.
Add custom attributes for this device. Click on the "Click to add..." row to add custom
attributes. By default, four custom attributes appear in the Attribute dropdown: Location, OS-
Version, Device-Type, Device-Vendor. You can enter any name in the attribute field. All
attributes are of String datatype. The value field can also be populated with any string. Each
time you enter a new custom attribute, it is available for selection in Attribute dropdown for all
devices.
NOTE: All attributes entered for a device are available in the role mapping rules editor under
the Device namespace.
Click Add to commit or Cancel to dismiss the popup.
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide