Powering Off The System - Dell Powerconnect W-ClearPass Hardware Appliances User Manual

W-clearpass policy manager 6.0 user guide
Hide thumbs Also See for Powerconnect W-ClearPass Hardware Appliances:
Table of Contents

Advertisement

3. Configure the Appliance
Replace the bolded placeholder entries in the following illustration with your local information:
Enter hostname:verne.xyzcompany.com
Enter Management Port IP Address: 192.168.5.10
Enter Management Port Subnet Mask: 255.255.255.0
Enter Management Port Gateway: 192.168.5.1
Enter Data Port IP Address: 192.168.7.55
Enter Data Port Subnet Mask: 255.255.255.0
Enter Data Port Gateway: 192.168.7.1
Enter Primary DNS: 198.168.5.3
Enter Secondary DNS: 192.168.5.1
4. Change your password
Use any string of at least six characters:
New Password:************
Confirm Password: ************
Going forward, you will use this password for cluster administration and management of the appliance.
5. Change the system date/time
Do you want to configure system date time information [y|n]: y
Please select the date time configuration options.
1) Set date time manually
2) Set date time by configuring NTP servers
Enter the option or press any key to quit: 2
Enter Primary NTP Server: pool.ntp.org
Enter Secondary NTP Server: time.nist.gov
Do you want to configure the timezone? [y|n]: y
After the timezone information is entered, you are asked to confirm the selection.
6. Commit or restart the configuration
Follow the prompts:
Proceed with the configuration [y[Y]/n[N]/q[Q]
y[Y] to continue
n[N] to start over again
q[Q] to quit
Enter the choice:Y
Successfully configured Policy Manager appliance
*************************************************************
* Initial configuration is complete
* Use the new login password to login to the CLI
* Exiting the CLI session in 2 minutes. Press any key to exit now
When your Policy Manager system is up and running, navigate to the Administration > Agents and Software
Updates > Software Updates page to view and download any available software updates. Refer to
icy Manager Software " on page 315

Powering Off the System

Perform the following to power off the system gracefully without logging in:
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide
.
for more information.
.
.
"Updating the Pol-
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Networking w-clearpass policy manager 6.0

Table of Contents