Import Snmp Trap Server; Export All Snmp Trap Servers - Dell Powerconnect W-ClearPass Hardware Appliances User Manual

Table 161:
Add SNMP Trap Server fields
Container
Host Address
Description
SNMP Version
Community String /Verify Community
String
Server Port
Save/Cancel

Import SNMP Trap Server

To import a trap server, navigate to Administration > External Servers > SNMP Trap Receivers and select the
Import SNMP Trap Server link.
Figure 253:
Fig: Import SNMP Trap Server
Table 162:
Import SNMP Trap Server
Container
Select File
Enter secret for the file (if any)
Import/Cancel

Export all SNMP Trap Servers

To export all SNMP trap servers, navigate to Administration > External Servers > SNMP Trap Receivers and
select the Export SNMP Trap Server link. This link exports all configured SNMP Trap Receivers. Click Export Trap
282
Description
Trap destination hostname or ip address.
NOTE: This server must have an SNMP trap receiver or trap viewer
installed.
Freeform description.
V1 or V2C.
Community string for sending the traps.
Port number for sending the traps; by default, port 162.
NOTE: Configure the trap server firewall for traffic on this port.
Click Save to commit the configuration or Cancel to dismiss.
Description
Browse to the SNMP Trap Server configuration file to be imported.
If the file was exported with a secret key for encryption, enter the same key here.
Click Import to commit, or Cancel to dismiss the popup.
Dell Networking W-ClearPass Policy Manager 6.0 | User Guide