This chapter provides an overview and several tasks supporting the use of device configuration templates in
AWMS, and contains the following topics:
"Group Templates" on page 149
"Viewing and Adding Templates" on page 150
"Configuring General Template Files and Variables" on page 153
"Configuring Cisco IOS Templates" on page 158
"Configuring Cisco Catalyst Switch Templates" on page 160
"Configuring Symbol Controller / HP WESM Templates" on page 161
"Configuring a Global Template" on page 162
Group Templates
Templates are helpful configuration tools that allow AWMS to manage virtually all device settings. A template
uses variables to adjust for minor configuration differences between devices.
Supported Device Templates
The Groups > Templates configuration page allows you to create configuration templates for the following types
of devices:
Dell PowerConnect W
NOTE: Dell recommends using the graphical Dell Config feature in support of Dell PowerConnect W devices. Refer to the
PowerConnect W Configuration Guide in Home > Documentation for additional information.
Aruba
Alcatel-Lucent
Cisco Aironet IOS autonomous APs
Cisco Catalyst switches
HP ProCurve 530 and WeSM controllers
Nomadix
Symbol
Trapeze
3Com
Nortel
Enterasys
Template Variables
Variables in templates configure device-specific properties, such as name, IP address and channel. Variables can
also be used to configure group-level properties, such as SSID and RADIUS server, which may differ from one
group to the next. The AWMS template understands many variables including the following:
Dell PowerConnect W AirWave 7.2 | User Guide
Chapter 6
Creating and Using Templates
Creating and Using Templates | 149
Dell