Dell PowerConnect W-Airwave User Manual page 139

Figure 95 Add Virtual Interfaces Page for Wired Devices
.
New physical and virtual interfaces are discovered using SNMP polling as described in "SNMP/HTTP Scanning"
on page 107. To refresh and reload all current interface information from a device, select Import Interfaces on
the bottom of the page as shown in Figure 96.
Figure 96 Import Interfaces for Refresh and Reload (lower portion of page)
.
You can view details for each interface on a wired device from its individual interface page as well. For details, see
"Understanding the APs/Devices > Interfaces Page" on page 129.
You can configure interface settings individually or in groups. For individual settings, select the pencil icon next
the interface name in AP/Devices > Interfaces.
This takes you to the Interfaces Monitoring and Configuration window which has a slightly different appearance
depending on whether you are configuring a physical or virtual interface, as shown in Figure 97 and Figure 98.
Dell PowerConnect W AirWave 7.2 | User Guide Discovering, Adding, and Managing Devices | 139