Pest Error Reporting - Xerox C2424 - WorkCentre Color Solid Ink Service Manual

POST Error Reporting Blink Pattern Definition Table (Continued)
Control
Panel PS, PE and
Error Control
Code Panel LEDs
15.07 Flutter and
then 15 blinks
15.08 Flutter and
then 15 blinks
15.09 Flutter and
then 15 blinks
15.10 Flutterand
then 15 blinks
15.11 Flutter and
then 15 blinks
16.01 Flutter only
16.02 Flutter only
16.03 Flutter only
16.04 Flutter only
17.01 Flutter and
then 17 blinks
18.01 Flutter and
then 18 blinks
18.02 Flutter and
then 18 blinks
18.03 Flutter and
then 18 blinks
18.04 Flutter only
19.01 Flutter and
then 19 blinks

PEST Error Reporting

PEST tests occur after POST tests have been run and PostScript has been initialized.
PEST checks the connections and operation of various system components.
Error codes for PEST tests are displayed on the control panel and are all in the
37,XXX.xx series. For troubleshooting PEST error codes, see "37,0XX.xx Errors -
PEST Faults" on page 3-37.
Error Messages and Codes
POST
Error
Type Description
Hard CPU interrupt error, spurious assertion.
Hard CPU interrupt error, no assertion.
Hard CPU interrupt error, spurious assertion.
Hard CPU interrupt error, no assertion.
Hard CPU interrupt error, IRQ spurious assertion.
Soft Real time clock read failure.
Soft Real-time clock write failure.
Soft Real-time clock re-read failure.
Soft Real-time clock does not tick.
Hard Memory test, less than 128 MB of RAM
detected. This is the minimum RAM required.
Add more RAM. Reseat the RAM SODIMM(s),
then replace the RAM SODIMM(s).
Hard IPCB ID read failure.
Hard IPCB ID mismatch.
Hard IPCB PCI configuration failure.
Soft IPCB version mismatch.
Hard Check and reseat cables. Replace hard drive, if
necessary.
3-7