Xerox C2424 - WorkCentre Color Solid Ink Service Manual page 98

POST Error Reporting Blink Pattern Definition Table (Continued)
Control
Panel PS, PE and
Error Control
Code Panel LEDs
10.02 Flutter only
11.01 Flutter and
then 11 blinks
11.02 Flutter and
then 11 blinks
11.03 Flutter and
then 11 blinks
11.04 Flutter and
then 11 blinks
12.xx Flutter only
13.01 Flutter and
then 13 blinks
13.02 Flutter and
then 13 blinks
14.xx Flutterand
then 14 blinks
15.01 Flutter and
then 15 blinks
15.02 Flutter and
then 15 blinks
15.03 Flutter and
then 15 blinks
15.04 Flutter and
then 15 blinks
15.05 Flutter and
then 15 blinks
15.06 Flutter and
then 15 blinks
3-6
POST
Error
Type Description
Soft PLD power control link invalid, mismatch error.
Hard EEPROM read failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM write failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM re-read failure.
1. Check EEPROM orientation.
2. Replace EEPROM.
Hard EEPROM data failure, mismatch error.
1. Check EEPROM orientation.
2. Replace EEPROM.
Soft Configuration card test failure.
1. Check card orientation.
2. Reseat then replace the configuration card.
NOTE:
Hard PHY reset failure, reset stuck low.
Hard PHY ID error, mismatch erro.
Hard USB ASIC test errors, N2280 netchip read,
write, and mismatch errors, POST hard errors.
Hard CPU interrupt error, spurious CPU interrupts.
Hard CPU interrupt error, missing CPU interrupts.
Hard CPU interrupt error, IRQ spurious assertion.
Hard CPU interrupt error, timer no assertion.
Hard CPU interrupt error, spurious assertion.
Hard CPU interrupt error, no assertion.
System will work as a base model
(without networking) without the
configuration card.
WorkCentre C2424 Service Manual