Xerox C2424 - WorkCentre Color Solid Ink Service Manual page 119

13,135.48:
The preheater thermistor returned a bad reading, or the reading was
corrupted by ESD.
Troubleshooting Procedure
Step Questions and Actions
1
1. Verify that the ambient temperature of the
room is within the systems optimal
environmental specification (see "System
Environmental Specifications" on
page 1-14).
2. Is the room too cold or too hot?
2 1. Run the Preheater test.
2. Did the test pass?
3 1. Check the wiring from the preheater.
2. Is the wiring connected properly and sound?
Error Messages and Codes
Yes
Advise Go to Step 2.
customer of
specification
requirements.
Replace the I/O Go to Step 3.
board.
Replace the Replace the
preheater wiring harness.
board.
No
3-27