Download  Print this page

Installing A Printer Hard Disk - Dell B5460dn Mono Laser Printer User Manual

User's guide.
Hide thumbs

Advertisement

Table of Contents
Additional printer setup

Installing a printer hard disk

Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer first before touching any controller board electronic components or
connectors.
1
Access the controller board.
For more information, see "Accessing the controller board" on page 14.
2
Unpack the printer hard disk.
3
Locate the appropriate connector on the controller board cage.
Note: If an optional ISP is currently installed, then the printer hard disk must be installed onto the ISP.
25

Advertisement

Table of Contents

   Also See for Dell B5460dn Mono Laser Printer

   Related Manuals for Dell B5460dn Mono Laser Printer

Comments to this Manuals

Symbols: 0
Latest comments: