Dell B5460dn Mono Laser Printer User Manual page 109

Understanding printer menus
Use
Home screen customization
Eco-Settings
Showroom
Change Background
Output Lighting
Normal/Standby Mode
Off
Dim
Bright
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Hole Punch Alarm
Timeouts
Sleep Mode
Disabled
1–180
To
Change the icons and buttons that appear on the printer control
panel.
For each icon or button, select from the following options:
Display
Do not display
Note: "Do not display" is the factory default setting.
Set the amount of light from the bin.
Notes:
•
If Eco-Mode is set to Energy or Energy/Paper, then the
factory default setting is Dim.
•
If Eco-Mode is set to Off or set to Paper, then the factory
default setting is Bright.
•
This menu appears only when an indicator light is installed
on the bin or when an optional bin with an indicator light is
added.
Set an alarm to sound when the printer requires user intervention.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
•
Off is the factory default setting for Alarm Control, Staple
Alarm, and Hole Punch Alarm. Off means no alarm will
sound.
• Single is the factory default setting for Cartridge Alarm,
Staple Alarm, and Hole Punch Alarm. Single sounds three
quick beeps.
•
Continuous repeats three beeps every 10 seconds.
Set the amount of time the printer waits after a job is printed before
it goes into a reduced power state.
Notes:
• 30 is the factory default setting.
•
Disabled appears only when Energy Conserve is set to Off.
•
Lower settings conserve more energy, but may require
longer warm‑up times.
•
Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warm‑up time.
109