Insert Staple Cartridge - Dell B5460dn Mono Laser Printer User Manual

Troubleshooting
Incompatible output bin [x] [59]
Do either of the following:
•
Remove the specified bin.
•
From the printer control panel, press
bin.
Incompatible tray [x] [59]
Do either of the following:
•
Remove the specified tray.
•
From the printer control panel, press
tray.
Incorrect paper size, open [paper source] [34]
Try one or more of the following:
•
Load the correct size of paper in the tray.
•
From the printer control panel, press
•
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
•
Make sure the correct paper size and type are specified in Print Properties or in the Print dialog.
• Make sure the paper size and type settings are specified in the Paper menu on the printer control panel.
•
Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the
paper is large enough for the data being printed.
•
Cancel the print job.
Insert hole punch box
Insert the hole punch box into the finisher, and then press

Insert staple cartridge

Do either of the following:
•
Insert a staple cartridge. For more information, see the instruction sheet that came with the supply.
•
From the printer control panel, press
Insert Tray [x]
Insert the indicated tray into the printer.
to clear the message and continue printing without using the specified
to clear the message and continue printing without using the specified
to clear the message and print using a different tray.
on the printer control panel to clear the message.
to clear the message and print without using the staple finisher.
176