Dell B5460dn Mono Laser Printer User Manual page 177

Troubleshooting
Install bin [x]
Try one or more of the following:
•
Install the specified bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified bin.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
•
Reset active bin
Install Tray [x]
Try one or more of the following:
• Install the specified tray:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Install the specified tray.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
• Reset the active bin.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, press
•
Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to:
> Settings >
•
Install additional printer memory.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, press
to stop the defragmentation and continue printing.
> Settings > >Print Settings >
to clear the message.
> Utilities Menu > > Format Flash >
177
> Yes >