Attaching Cables - Dell B5460dn Mono Laser Printer User Manual

Additional printer setup
6
Align the printer with the tray, and then slowly lower the printer into place.
7
Turn the printer back on.
Note: When the printer software and any optional trays are installed, you may need to manually add the
options in the printer driver to make them available for print jobs. For more information, see "Updating
available options in the printer driver" on page 35.

Attaching cables

CAUTION—POTENTIAL INJURY: Do not set up this product or make any electrical or cabling connections, such
as a power cord, a fax feature, or USB cable, during a lightning storm.
Connect the printer to the computer using a USB cable or Ethernet cable.
Make sure to match the following:
• The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable to the Ethernet port
•
The appropriate parallel cable with the parallel port
32