Dell B5460dn Mono Laser Printer User Manual page 111

Understanding printer menus
Use
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Max Auto Reboots
1–20
Error Recovery
Max Auto Reboots
1–20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
To
Set the printer to restart when an error is encountered.
Notes:
•
"Reboot always" is the factory default setting for Auto
Reboot.
• 5 is the factory default setting for Max Auto Reboots.
•
If the printer performs the same number of automatic
reboots that is set in the printer within a certain amount of
time, then the printer shows the applicable error instead of
rebooting.
Set the number of automatic reboots that the printer can perform.
Notes:
•
5 is the factory default setting.
•
If the printer performs a number of automatic reboots that is
the same as the menu setting within a certain amount of
time, then the printer displays the applicable error instead of
rebooting.
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Set the printer to check for jammed paper automatically.
Note: On is the factory default setting.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
•
Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
111