Load Staples - Dell B5460dn Mono Laser Printer User Manual

Troubleshooting
Insufficient memory, some held jobs will not be restored [37]
Do either of the following:
•
From the printer control panel, press
•
Delete other held jobs to free up additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, press
of the print job.
•
Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Try one or more of the following:
•
From the printer control panel, press
• Install additional printer memory.

Load staples

Try one or more of the following:
•
Replace or insert the specified staple cartridge in the finisher.
For more information, see the "Replacing supplies" section of the User's Guide.
• From the printer control panel, press
•
Cancel the print job.
Load [paper source] with [custom string] [orientation]
Try one or more of the following:
•
Load the indicated tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper
source.
•
Cancel the current job.
to clear the message.
to print the portion of the job already stored and begin collating the rest
to disable Resource Save, clear the message, and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.
178