Appendix A Add-In Cards; Port 80-83 Add-In Card (Included); Figure 10. Port 80-83 Interposer Card - Intel BX80580Q9400 - Core 2 Quad 2.66 GHz Processor User Manual

Add-In Cards

Appendix A Add-In Cards

Of the add-in cards described in this appendix, only the Port 80-83 Card, PCI
Expansion Card (Thimble Peak 2) and the HDMI and Display Port Video Interface Card
(Eaglemont) are included in the development kit. Contact your Intel Representative
to obtain cards not included in the kit.
A.1

Port 80-83 Add-in Card (Included)

Port 80-83 Add-in card plugs to the CRB through TPM header. It also provides an
additional 10 pin LPC header for LPC supported interfaces. Port80-83 card decodes the
LPC bus BIOS POST codes and displays on four 7-segment display. It also has optional
Intel® 82802 Firmware Hub Device footprint for BIOS support.

Figure 10. Port 80-83 Interposer Card

Jumper J1 is used for the following configurations:
Jumper J1
Open (None)
1-2
2-3
Development Kit User's Manual
Description
AIC Intel® 82802 Firmware Hub Device Disabled
Display Ports 81-80
AIC Intel® 82802 Firmware Hub Device enabled
Display Ports 81-80
AIC Intel® 82802 Firmware Hub Device Disabled
Display Ports 83-82
61