Telnet Settings; Web Settings - D-Link DGS-3620-52P Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
View Name
Access right
Enter a case-sensitive
community
Enter the community
again for confirmation
Click the Apply button to accept the changes made.

Telnet Settings

Users can configure Telnet Settings on the Switch.
To view the following window, click Management > Telnet Settings, as show below:
The fields that can be configured are described below:
Parameter
Telnet State
Port (1-65535)
Click the Apply button to accept the changes made.

Web Settings

Users can configure the Web settings on the Switch.
To view the following window, click Management > Web Settings, as show below:
Figure 3-48 SNMP community Maskking Settings window
Description
Use the drop-down menu to choose the MIB view name.
Use the drop-down menu to select the access right for the user using the
community string. Available options are Read Only and Read Write.
Enter a case-sensitive community string.
Retype the community string for confirmation.
Figure 3-49 Telnet Settings window
Description
Telnet configuration is Enabled by default. If you do not want to allow configuration of the
system through Telnet choose Disabled.
The TCP port number used for Telnet management of the Switch. The "well-known" TCP
port for the Telnet protocol is 23.
59