D-Link DGS-3620-52P Reference Manual page 497

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
pimInvalidJoinPrune
pimRPMappingChage
pimInterfaceElection
LLDP
lldpRemTablesChange
LLDP-MED
lldpXMedTopologyCha
ngeDetected
A pimInvalidJoinPrune notification signifies
that an invalid PIM Join/Prune message was
received by this device.
This notification is generated whenever the
counter pimInvalidJoinPruneMsgsRcvd is
incremented, subject to the rate limit
specified by
pimInvalidJoinPruneNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimInvalidJoinPruneAddressType
(3) pimInvalidJoinPruneOrigin
(4) pimInvalidJoinPruneGroup
(5) pimInvalidJoinPruneRp
(6) pimNeighborUpTime
A pimRPMappingChange notification
signifies a change to the active RP mapping
on this device.
This notification is generated whenever the
counter pimRPMappingChangeCount is
incremented, subject to the rate limit
specified by
pimRPMappingChangeNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimGroupMappingPrecedence
A pimInterfaceElection notification signifies
that a new DR or DF has been elected on a
network.
This notification is generated whenever the
counter pimInterfaceElectionWinCount is
incremented, subject to the rate limit
specified by
pimInterfaceElectionNotificationPeriod.
Binding objects:
(1) pimInterfaceAddressType
(2) pimInterfaceAddress
A lldpRemTablesChange notification is sent
when
the value
lldpStatsRemTableLastChangeTime
changes.
Binding objects：
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
A notification generated by the local device
sensing
a change in the topology that indicates that a
new
remote device attached to a local port, or a
remote
487
1.3.6.1.2.1.157.0.3
1.3.6.1.2.1.157.0.4
1.3.6.1.2.1.157.0.5
1.0.8802.1.1.2.0.0.1
of
1.0.8808.1.1.2.1.5.4795.
0.1