Appendix C Trap Entries - D-Link DGS-3620-52P Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Appendix C
This table lists the trap logs found on the Switch.
Category Trap Name
MAC Notification
Function
swL2macNotification
MAC-based Access
Control
swMacBasedAccessControlLoggedS
uccess
swMacBasedAccessControlLoggedF
ail
swMacBasedAccessControlAgesOut
PIM6
pimNeighborLoss
pimInvalidRegister
Trap Entries
Description
This trap indicates the MAC addresses
variation in address table
Binding objects:
(1)swL2macNotifyInfo
The trap is sent when a MAC-based Access
Control host is successfully logged in.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
The trap is sent when a MAC-based Access
Control host login fails.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
The trap is sent when a MAC-based Access
Control host ages out.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
A pimNeighborLoss notification signifies the
loss of an adjacency with a neighbor. This
notification should be generated when the
neighbor timer expires, and the router has
no other neighbor on the same interface
with the same IP version and a lower IP
address than itself.
This notification is generated whenever the
counter pimNeighborLossCount is
incremented, subject to the rate limit
specified by
pimNieghborLossNotificationsPeriod.
Binding objects:
(1) pimNeighborUpTime
A pimInvalidRegister notification signifies
that an invalid PIM Register message was
received by this device.
This notification is generated whenever the
counter pimInvalidRegisterMsgsRcvd is
incremented, subject to the rate limit
specified by
pimInvalidRegisterNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimInvalidRegisterAddressType
(3) pimInvalidRegisterOrigin
(4) pimInvalidRegisterGroup
(5) pimInvalidRegisterRp
486
OID
1.3.6.1.
4.1.171.
11.118.X.
2.100.1.2.
0.1
(X:module ID)
1.3.6.1.4.1.171.12.35.11.
1.0.1
1.3.6.1.4.1.171.12.35.11.
1.0.2
1.3.6.1.4.1.171.12.35.11.
1.0.3
1.3.6.1.2.1.157.0.1
1.3.6.1.2.1.157.0.2