D-Link DGS-3620-52P Reference Manual page 499

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
bgpBackwardTransNotification
Stacking
swUnitInsert
swUnitRemove
swUnitFailure
swUnitTPChange
swUnitRoleChange
VRRP
vrrpTrapNewMaster
vrrpTrapAuthFailure
Port Security
swL2PortSecurityViolationTrap
The BGP established event is generated
when the BGP FSM
ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
Unit Hot Insert notification.
Binding objects：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
Unit Hot Remove notification.
Binding objects：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
Unit Failure notification.
Binding objects：
(1) swUnitMgmtId.
The stacking topology change notification.
Binding objects：
(1) swStackTopologyType
(2) swUnitMgmtId
(3) swUnitMgmtMacAddr
The stacking unit role change notification.
Binding objects：
(1) swStackRoleType
(2) swUnitMgmtId
The newMaster trap indicates that the sending
agent has transitioned to 'Master' state.
Binding objects:
(1) vrrpOperMasterIpAddr
A vrrpAuthFailure trap signifies that a packet
has been received from a router whose
authentication key or authentication
conflicts with this router's authentication key or
authentication type. Implementation of this trap
is optional.
Binding objects:
(1) vrrpTrapPacketSrc
(2) vrrpTrapAuthErrorType
When the port security trap is enabled, new
MAC addresses that violate the pre-defined port
security configuration will trigger trap messages
to be sent out.
Binding objects：
(1)swPortSecPortIndex
489
enters the
1.3.6.1.2.1.15.0.2
1.3.6.1.4.1.171.12.11.2.2.1.
0.1
1.3.6.1.4.1.171.12.11.2.2.1.
0.2
1.3.6.1.4.1.171.12.11.2.2.
1.0.3
1.3.6.1.4.1.171.12.11.2.2.
1.0.4
1.3.6.1.4.1.171.12.1
1.2.2.1.0.5
1.3.6.1.2.1.68.0.1
type
1.3.6.1.2.1.68.0.2
1.3.6.1.4.1.171.11.118.X.2
.100.1.2.0.2,(X:module ID)