D-Link DGS-3620-52P Reference Manual page 443

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the View Table link to display the information in a table rather than a line graph.
The fields that can be configured are described below:
Parameter
Port
Time Interval
Record Number
CRCError
UnderSize
Figure 11-10 Received (RX) window (for errors)
Figure 11-11 RX Error Analysis window (table)
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
Counts otherwise valid packets that did not end on a byte (octet) boundary.
The number of packets detected that are less than the minimum permitted packets size
433