Manual Internet Setup; Static Ip - D-Link DIR-860L User Manual

Section 3 - Configuration
Select your connection type from the My.Internet.Connect.Is drop-down box. Choose Static IP if all of the necessary IP information has been provided
by your ISP. You will need to enter the IP address, subnet mask, gateway address, and DNS address(es). Each IP address entered in the fields must
be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
My Internet Select Static.IP to manually enter the IP settings supplied by your ISP.
Connection Is:
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied by your ISP
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port's physical interface
MAC address on the Broadband Router. It is not recommended that you
change the default MAC address unless required by your ISP. You can
use the Clone.Your.PC's.MAC.Address button to replace the Internet
port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-860L User Manual

Manual Internet Setup

Static IP

26