Rear Panel - TP-Link TL-ER604W User Manual

Reset button

Use the button to restore the Router to the factory defaults. With the Router powered on, use a pin to
press and hold the Reset button (about 4~5 seconds). After the SYS LED goes out, release the Reset
button. If the SYS LED is flashing with a high frequency about two or three seconds, it means the Router
is restored successfully.
Wifi button

Press this button to enable or disable WI-FI.

2.3.2 Rear Panel

The rear panel of TL-ER604W is shown as the following figure.
Antenna

The router provides two external detachable antennas for receiving and transmitting the wireless data.
Power

The power socket is where you will connect the power adapter. Please use the power adapter provided
with this TL-ER604W SafeStream Wireless N Gigabit Broadband VPN Router.
On/Off

Press this button to turn on or turn off the Router.
Note:
Please use only the power cord provided with this Router.
Figure 2-2 Rear Panel
-7-