TP-Link TL-ER604W User Manual page 33

Wireless n gigabit broadband vpn router
Hide thumbs Also See for TL-ER604W:
Table of Contents

Advertisement

The following items are displayed on this screen:
DHCP Settings
DHCP Server:
Start IP Address:
End IP Address:
Lease Time:
Default Gateway:
Default Domain:
Primary DNS:
Figure 3-14 DHCP Settings
Enable or disable the DHCP server on your Router. To enable the
Router to assign the TCP/IP parameters to the computers in the LAN
automatically, please select Enable.
Enter the Start IP address to define a range for the DHCP server to
assign dynamic IP addresses. This address should be in the same IP
address subnet with the Router's LAN IP address. The default
address is 192.168.0.2.
Enter the End IP address to define a range for the DHCP server to
assign dynamic IP addresses. This address should be in the same IP
address subnet with the Router's LAN IP address. The default
address is 192.168.0.254.
Specify the length of time the DHCP server will reserve the IP address
for each computer. After the IP address expired, the client will be
automatically assigned a new one.
Optional. Enter the Gateway address to be assigned. It is
recommended to enter the IP address of the LAN port of the Router.
Optional. Enter the domain name of your network.
Optional. Enter the Primary DNS server address provided by your
ISP. It is recommended to enter the IP address of the LAN port of the
Router.
-28-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents