TP-Link TL-ER604W User Manual page 106

3.6.3.1 L2TP/PPTP Tunnel
On this page, you can configure the L2TP/PPTP VPN.
Choose the menu VPN→L2TP/PPTP→L2TP/PPTP Tunnel to load the following page.
The following items are displayed on this screen:
 General
Enable VPN-to-Internet:
Hello Interval:
L2TP/PPTP Tunnel

Protocol:
Mode:
Figure 3-67 L2TP/PPTP Tunnel
Specify whether to enable VPN-to-Internet function. If enabled, the
VPN client is permitted to access the LAN of the server and Internet.
Specify the interval to send hello packets.
Select the protocol for VPN tunnel. Options include L2TP and PPTP.
Specify the working mode for this Router. Options include:
Client: In this mode, the device sends a request to the remote

L2TP/PPTP server initiatively for establishing a tunnel.
Server: In this mode, the Router responds the request from the

remote client for establishing a tunnel.
-101-