TP-Link TL-ER604W User Manual page 110

The following items are displayed on this screen:
General

PPPoE Server:
Dial-up Access Only:
PPPoE User Isolation:
Primary/Secondary
DNS:
Max Sessions:
Max Echo-Requests:
Idle Timeout:
Figure 3-70 General
Specify whether to enable the PPPoE Server function.
Specify whether to enable the Dial-up Access Only function. If enabled,
only the Dial-in Users and the user with Exceptional IP can access the
Internet.
Specify whether to allow the Dial-in Users to communicate with one
another.
Enter the Primary/Secondary DNS server address. The default is
0.0.0.0.
Specify the maximum number of the sessions for PPPoE server. The
default is 256.
Specify the maximum number of Echo-Requests sent by the server to
wait for response. The default is 10. The link will be dropped when the
number of the unacknowledged LCP echo requests reaches your
specified Max Echo-Requests.
Enter the maximum idle time. The session will be terminated after it
has been inactive for this specified period. It can be 0-10080 minutes.
If you want your Internet connection to remain on at all times, enter 0
in the Idle Timeout field. The default value is 30.
-105-