TP-Link TL-ER604W User Manual page 19

Get IP Address by
Unicast:
Use the following DNS
Server:
Primary DNS:
Secondary DNS:
Upstream Bandwidth:
Downstream
Bandwidth:
 Dynamic IP Status
Status:
IP Address:
Subnet Mask:
the default value if no other MTU value is provided by your ISP.
The broadcast requirement may not be supported by a few ISPs.
Select this option if you can not get the IP address from your ISP
even if with a normal network connection. This option is not
required generally.
Select this option to enter the DNS (Domain Name Server)
address manually.
Enter the IP address of your ISP's Primary DNS (Domain Name
Server). If you are not clear, please consult your ISP.
Optional. If a Secondary DNS Server address is available, enter
it.
Specify the bandwidth for transmitting packets on the port.
Specify the bandwidth for receiving packets on the port.
Displays the status of obtaining an IP address from your ISP.
"Disabled" indicates that the Dynamic IP connection type is not

applied.
"Connecting" indicates that the Router is obtaining the IP

parameters from your ISP.
"Connected" indicates that the Router has successfully

obtained the IP parameters from your ISP.
"Disconnected" indicates that the IP address has been

manually released or the request of the Router gets no response
from your ISP. Please check your network connection and consult
your ISP if this problem remains.
Displays the IP address assigned by your ISP.
Displays the Subnet Mask assigned by your ISP.
-14-