TP-Link TL-ER604W User Manual page 102

Status:
Manual Mode

IPsec Proposal:
Incoming SPI:
AH Authentication Key-In:
ESP Authentication Key-In:
ESP Encryption: Key-In:
Outgoing SPI:
AH Authentication Key-Out:
ESP Authentication Key-Out:
Activate or inactivate the entry.
Select the IPsec Proposal. Only one proposal can be selected
on Manual mode. You need to first create the IPsec Proposal.
Specify the Incoming SPI (Security Parameter Index) manually.
The Incoming SPI here must match the Outgoing SPI value at
the other end of the tunnel, and vice versa.
Specify the inbound AH Authentication Key manually if AH
protocol is used in the corresponding IPsec Proposal. The
inbound key here must match the outbound AH authentication
key at the other end of the tunnel, and vice versa.
Specify the inbound ESP Authentication Key manually if ESP
protocol is used in the corresponding IPsec Proposal. The
inbound key here must match the outbound ESP authentication
key at the other end of the tunnel, and vice versa.
Specify the inbound ESP Encryption Key manually if ESP
protocol is used in the corresponding IPsec Proposal. The
inbound key here must match the outbound ESP encryption key
at the other end of the tunnel, and vice versa.
Specify the Outgoing SPI (Security Parameter Index) manually.
The Outgoing SPI here must match the Incoming SPI value at
the other end of the tunnel, and vice versa.
Specify the outbound AH Authentication Key manually if AH
protocol is used in the corresponding IPsec Proposal. The
outbound key here must match the inbound AH authentication
key at the other end of the tunnel, and vice versa.
Specify the outbound ESP Authentication Key manually if ESP
protocol is used in the corresponding IPsec Proposal. The
outbound key here must match the inbound ESP authentication
key at the other end of the tunnel, and vice versa.
-97-