TP-Link TL-ER604W User Manual page 65

The following items are displayed on this screen:
 Virtual Server
Name:
Interface:
External Port:
Internal Port:
Protocol:
Internal Server IP:
Status:
Note:
● The External port and Internal Port should be set in the range of 1-65535.
● The external ports of different entries should be different, whereas the internal ports can be the
same.
Figure 3-36 Virtual Server
Enter a name for Virtual Server entries. Up to 28 characters can be
entered.
Select an interface for forwarding data packets.
Enter the service port or port range the Router provided for accessing
external network. All the requests from Internet to this service port or
port range will be redirected to the specified server in local network.
Specify the service port of the LAN host as virtual server.
Specify the protocol used for the entry.
Enter the IP address of the specified internal server for the entry. All
the requests from the Internet to the specified LAN port will be
redirected to this host.
Activate or inactivate the entry.
-60-