The Rear Panel; The Side Panel - TP-Link TL-MR3420 User Manual

1.4.2 The Rear Panel

The following parts are located on the rear panel (View from left to right).
POWER: The Power socket is where you will connect the power adapter. Please use the

power adapter provided with this TL-MR3420 3G/4G Wireless N router.
ON/OFF: The switch is for you to turn on/off the router, but only with the router powered on.

4,3,2,1 (LAN): These ports (4,3,2,1) connect the router to the local PC(s)

WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet

 WPS/RESET:
There are two ways to reset to the router's factory defaults:
1) Use the Factory Defaults function on "System Tools > Factory Defaults" page in the
router's Web-based Utility.
2) Use the Factory Default Reset button: With the router powered on, use a pin to press
and hold the WPS/RESET button (about 5 seconds) until the SYS LED becomes
quick- flashing from slow-flashing. And then release the button and wait the router to
reboot to its factory default settings.
Wireless antenna: To receive and transmit the wireless data.


1.4.3 The Side Panel

The following parts are located on the side plate (View from left to right).
WIFI: This switch is an easy and convenient operation for you to turn on or off the wireless

network.
USB: Connect to the USB Modem.

TL-MR3420 3G/4G Wireles N Router User Guide
-4-