Virtual Server - TP-Link TL-ER604W User Manual

The configured entries are as follows:
2. Then set the corresponding Static Route entry, enter the IP address of the interface connecting
the Router and the three layer switch into the Next Hop field.
Choose the menu Advanced→Routing→Static Route to load the following page.
The Static Route entry is as follows:
3.4.1.4

Virtual Server

Virtual server sets up public services in your private network, such as DNS, Email and FTP, and
defines a service port. All the service requests to this port will be transmitted to the LAN server
appointed by the Router via IP address.
Choose the menu Advanced→NAT→Virtual Server to load the following page.
-59-