User Group; Group - TP-Link TL-ER604W User Manual

 General
Select a SSID, the status of the host in this wireless network will display on the following table.
 Host Status
MAC Address:
SSID:
Current Status:
Received Packets:
Transmitted Packets:
Bytes Tx:
Bytes Rx:
Rate Tx:
Rate Rx:

3.3 User Group

The User Group function is used to group different users for unified management, so that you can
perform other applications such as Bandwidth Control, Session Limit, and Access Control etc. on per

group.

3.3.1 Group
On this page you can define the group for management.
Choose the menu User Group→Group to load the following page.
Figure 3-29 Host Status
Displays the MAC address of the host which access the Router by wireless
connection.
Displays the name of the SSID to which the host connects.
Displays the Status of the wireless connection.
Displays the total packets received by the host.
Displays the total packets transmitted by the host.
Displays the total bytes transmitted by the host.
Displays the total bytes received by the host.
Displays the rate for transmitting data frames.
Displays the rate for receiving data frames.
-52-