Blind
wide
narrow
Backside of Fabric
Frontside
Flat Joining Seam
96
Blindstitch Wide no. 9
►
for medium weight to heavy fabric
Blindstitch Narrow no. 29
►
for fine fabrics (small stitches are visible on the right
side = decorative effect)
Preparation
►
finish the raw edges as desired
►
fold the hem and baste or pin in place
►
fold the garment back over the right side of the fabric to
expose the finished lower edge (see drawing)
►
place the work under the presser foot with the guide
positioned against the folded back fabric
Sewing
►
the needle should just pierce the edge of the fold
►
after sewing about 4" (10cm), check both sides of fabric
and adjust the stitch width if necessary
►
Blindstitch foot no. 5
Stretch Overlock no. 13
►
ideal for fluffy, thick materials such as terry cloth, felt
and leather
Sewing
►
fabric edges are overlapped and the stitch is placed on
the seam allowance which produces a very flat, durable
seam
►
sew stretch overlock along the fabric edge
►
the stitch should sew over the edge of the top layer of
fabric on the right swing of the needle
►
Reverse pattern foot no. 1C