Properties
1
Fill Stitch Type
148
►
change the stitch type
►
change the stitch density
►
the basic setting of the step stitch (fill stitch) is activated
by touching the icon «Change Stitch Type»
If the motif is enlarged substantially, long satin
I
s
stitches occur, tunneling the fabric.
I
In this case, it is recommended to switch to
t
the step stitch fill.
The embroidery motifs are filled with satin or step stitches.
Satin Stitch
►
the needle swings from one side to the other (tight
zigzag)
Step Stitch (Fill Stitch)
►
the needle stitches in straight rows at regular intervals
(straight-stitching)
►
touch the icon «Change Stitch Type»
►
the satin stitch fill changes to a maximum of 8mm long
step stitches fill (basic setting)
►
touch the «+ /-» icon or turn the stitch width knob
clockwise/counterclockwise and the maximum step
stitch length is increased/decreased
►
the maximum stitch length is 12.7mm
►
touch
, the selected step stitch length is saved and
the Edit screen appears
►
touch the «Reset» icon, basic setting (8mm) is activated
►
to fill the motif with satin stitches again, touch the
«Change Stitch Type» icon again