Slide-on Table
Thread Cutter
The slide-on table increases the sewing surface.
Attaching the Table
►
raise the needle and presser foot
►
from the left, push table to the right over the free-arm
and push firmly so that it engages over the fixing cam
Removing the Table
►
raise needle and presser foot
►
press the button down and remove to the left
Remove the slide-on table only when
Rem
bob
bobbin cover is closed.
Seam Guide
►
press the release button and insert into the groove
(underside of table) from left or right
►
can be moved over the entire table length
Scale
►
«0» corresponds to the center needle position
on Head Frame
►
pull both threads from back to front over the cutter
►
threads release automatically as soon as the first stitch
is sewn
at bobbin winder
►
after winding bobbin, pull thread in direction of arrow
over thread cutter
17