Monograms
Monogram Sizes
S
Sideways-Motion Stitch Patterns, e.g.
S
Sewing Monograms
►
►
use the slide-on table to increase the
sewing surface
►
►
when sewing Sideways Motion stitches
make sure that the fabric is fed evenly and
lightly, ensuring that it cannot push against
or catch on anything
►
it is important to let the sewing computer
sew, without pulling, pushing or holding
back the fabric
►
use the presser foot no. 40C
Balance
64
►
the monograms
are symbolized with four arrows and the
size in mm in the upper left corner in the Stitch Altering
Area
►
the monograms are stitched in sideways motion
►
start (green dot) and end (red cross) are visible in the
Stitch Altering Area
►
lettering size 1 = 30mm
►
at the start of the monogram program size 1 is activated
►
monograms in size 1 are individual letters = the sewing
computer sews and stops automatically
►
lettering size 2 = 20mm
►
touch «Alphabet Size»; number 2 is highlighted
►
monograms in size 2 are continuously sewn in a
horizontal line
►
lettering size 3 = 15mm
►
touch «Alphabet Size»; number 3 is blue
►
monograms in size 3 are continuously sewn in a
horizontal line
Sewing a test sample with the threads,
S
t
the actual fabric and stabilizer you intend to
u
use is recommended.
►
stitch patterns may differ from the original shape
depending on the fabric, stabilizer and thread quality
►
with the Balance function it is possible to adjust the
stitch pattern to suit the fabric used