Embroidery Sequence Control When Thread Breaks; Resuming Embroidering - Bernina 830LE Manual

Embroidery Sequence Control
when Thread Breaks
► a special screen opens
► motif appears in original size on the left-hand side of the
screen and in an enlarged view on the right
► this makes it easier to check the embroidery sequence
► the information area for operating the stitch width and
stitch length knobs is displayed
► turn knobs counterclockwise (or clockwise, the hoop is
moved backwards (or forwards) in the embroidery
sequence
► turn stitch width knob slowly, hoop is moved stitch by
stitch
► turn stitch length knob, hoop is moved in large steps
(approx. 50 steps)
► the number in the information area shows the number of
stitches in the embroidery sequence
► use the «0-9» field to go directly to a stitching position
► position the needle back far enough so that it will
resume stitching several stitches before the thread
breakage
► to return to original position, touch information area
► touch to close the special screen

Resuming Embroidering

► to continue embroidering, touch the start-stop-button or
press the foot control
159