Bernina 830LE Manual page 133

Embroidery speed
► optimum or maximum embroidery speed
when using Mega or Jumbo hoop
► default is optimum speed
Move Motif
► display of the alteration in 1/10mm
► to move embroidery motif sideways
(horizontal), turn stitch width knob - to move
to the right turn knob clockwise, to move
to the left turn knob counterclockwise
► to move embroidery motif lengthwise (verti-
cal), turn stitch length knob - to move up turn
knob clockwise, to move down turn knob
counterclockwise
► to move embroidery motif diagonally, turn
stitch width and length knobs (number is the
same in both information icons)
Rotate Motif
► display of position in degrees (°)
► to rotate embroidery motif clockwise, turn
stitch width knob clockwise
► to rotate embroidery motif counterclockwise,
turn stitch width knob counterclockwise
► touch icon several times and the embroidery
motif is rotated in 90° steps, clockwise (0°,
90°, 180°, 270°, 360°)
Hoop Relocator
► the hoop moves horizontally to the center
► touch , the hoop moves back to the
previous position
Single/Multi-Color Motif
► if the icon is active, the entire motif will be
stitched in one color (without stopping)
► if the icon is inactive, the colors will be embroi-
dered individually
Thread Tension
► change upper thread tension
► the respective value appears in the icon
Mirror Image (Left/Right)
► the motif is mirrored horizontally (left/right)
Mirror Image (Up/Down)
► the motif is mirrored vertically (up/down)
Embroidery Sequence Control (in the
event of thread breakage)
► in the left screen the motif is shown in the
normal size
► in the right screen the motif is enlarged
Save
► the Save screen appears
Basting Box
► the embroidery motif is outlined with a straight
stitch
► touch icon again, the symbol changes and
Basting Box follows outline of hoop
► touch icon again to switch off the Basting Box
function, otherwise it'll remain active even
after selection of a new motif
Move Hoop
► if the fabric has to be re-hooped when stitching
a large embroidery motif (e.g. lettering,
borders etc.), the hoop has to be moved to the
last stitch of the already embroidered part with
the stitch width and stitch length knob
Motif, Color, Sequence Selection by
Number
► select individual motifs by number
► select thread colors by number
► in the event of thread breakage, select the
stitching position by number
Color Information Bar
► information about the active color:
‣ display of active colors
‣ position of active color (first number)
‣ number of all colors (second number)
‣ thread/color code of selected thread brand
► right and left arrow change the current stitch
color
► the embroidery hoop moves to the first stitch
of the active color
► the active color can also be individually
embroidered
Park Module
► the embroidery arm travels horizontally to the
left to the park position
► remove the embroidery hoop
► change to the sewing mode
► even with the attached embroidery module,
the sewing projects are carried out trouble free
Move Hoop to Back
► the hoop moves vertically to the far back
► better access for changing the bobbin
Disengage Jump Stitches
► icon is active by default, jump stitches are
automatically cut
► touch icon, jump stitches must be cut by hand
Endless Embroidery
► screen open to create a border (row of motifs)
Fit to Hoop
► when embroidering borders, the size of the
motifs entered is adjusted so that they fit in the
hoop
Time/Alarm
► set the current time (hh:mm) at the top of the
screen using the «+» and «-» icon
► touch the alarm key at the bottom of the
screen
► set the alarm time with the «+» and «-» icon or
the knobs; a personal message may be
entered via the keyboard
► the current time is now displayed in red
133