Double Needle; Changing The Thread - Bernina 830LE Manual

Double/Triple Needle
A
A

Double Needle

► touch the Security Program icon
► touch the appropriate needle icon (double needle) in the
Security Program screen
► place a thread spool on the center spool pin and one on
the rear spool pin and thread the corresponding guides
on the telescopic rod
► guide the thread from the rear spool pin into the
threading slit and the rear of the tension disc A. Insert
thread into the thread guide of the needle clamp
► guide the thread from the center spool pin into the
threading slit and in front of the tension disc A. Insert
thread into the thread guide of the needle clamp
► join both threads in one hand and guide them both in
the defined groove of the thread holder and pull them
back to front over the thread cutter, cutting both threads
► touch the icon «Manual Threading» on the threading
animation screen. Next touch the illuminated automatic
threading button
► using the manual threader in your accessory kit,
manually thread the left needle and then the right
needle
Triple Needle
► in the Security Program select triple needle
► place a thread spool on each spool pin and thread the
respective guides on the telescopic rod
► thread as usual, guiding the thread from the rear and
center spool pin in the threading slit to the rear of
thread tension disc A and the thread from the front
spool pin in front of the tension disc

Changing the thread

► cut the spool thread before the pre-tension and pull out
of the sewing computer to front near the needle
A
19